燃油管檢測規則翻譯-中譯英

Unitrans世聯

    世聯北京翻譯公司資深譯員對燃油管檢測規則翻譯。
    檢驗規則
    Inspection Rules
    1.燃油管檢驗和驗收項目，按3.1、3.2、3.3、3.4條規定進行。需要時，也可抽檢其它項目。
    1Items for inspecting and accepting fuel pipes: Provisions in Item 3.1, 3.2, 3.3, and 3.4 shall be followed. Additional sampling inspection items may be conducted as necessary.
    2.檢驗抽樣方法和檢查水平按GB2828標準執行。
    GB2828 shall be followed to determine the sampling inspection method and inspection level.
    3.型式檢驗凡屬下列情況之一應進行型式試驗
    3Type test: A type test is required:
    a.開發定型前天
    To finalize a new type of development;
    b.對批量生產的產品，每一年進行一次型式試驗
    Once per year for each product of scale production;
    c.國家監督機構或顧客提出進行型式試驗要求時
    On demand by the national supervisory organization or customers;
    d.材料、結構、工藝有較大改進時應進行型式試驗
    Whenever the material, structure, or process is remarkably improved; or
    e.停產半年以上恢復生產時。
    When production is resumed from a stop of half a year or longer.
    4.型式試驗項目為本標準第3項規定的所有內容
    All the items specified in Paragraph 3 herein shall be included in a type test.
    5.型式檢驗全部項目合格方可判定型式檢驗合格：如有一項不合格，應對此項加倍數量抽樣復檢，如仍有一項不合格，則判本次型式檢驗不合格。
    No product may be deemed as passing the type test unless it passes all the items specified for the type test. Should it fails to pass an item, the type test shall be conducted once again with doubled sample size. In event that it fails to pass an item once more, it shall be determined as failed to pass the type test.
    如果您有這方面的翻譯需求，可以隨時與世聯在線客服人員聯系，同時也可以撥打我們的客服熱線：010-64809262